AN ECONOMICAL UTILITY BIN FOR ANY FEED STORAGE NEED
1.6 and 2.1 ton capacities
Premium Galvanized Steel Construction
Sturdy ladder - same one you find on our commercial grain tanks
Heavy (11 gauge) channel legs secured with 1/4 inch anchor plates
FOUR MODELS
Model MBSLGT (shown
above) - 2 shells; 1.6 ton (64 bushel) capacity. Model MBSLGT +20 (shown right) - 3
shells; 2.1 ton (84 bushel) capacity. Model F60MB (not shown) - 2 shells;
1.6 ton (64 bushel) capacity. Model F60MB +20 (not shown) - 3
shells; 2.1 ton (84 bushel) capacity.
MBSLGT and MBSLGT +20 come with a slide gate for feed discharge at the bottom
of the cone (see above). These bins cannot be used with rigid or flex auger.
F60MB and F60MB +20 come with a poly transition, transfer plate and slide
assembly and will accept either rigid or flex auger.
POSI-LOC TM latch securely fastens one piece spun
cover.
Leg anchor system (1/4 inch plate) gives stability, yet is simple to install,
simple to move; one inch (2.54 cm) anchor holes.
MBSLGT and MBSLGT +20 have 40 inches (101.6 cm) of clearance at discharge.
Ladder permanently attached; plenty of space between rungs and side of bin
for firms footing; no flimsy angle iron steps.
F60MB and F60MB +20 have 30 inches (76.2 cm) of clearance at discharge for
filling our model 500TNS Tote 'N Serv Feed Cart or for sacking.
View the instruction
sheet for the Mini-Bin
Download
an electronic instruction sheet as an Adobe PDF file.
Best
viewed at 125% Zoom
For
the electronic instruction sheet version you will need Adobe Acrobat
Reader Plug-in. If you do not have it you can download it for free at the Adobe
Acrobat Website
